Medium Wave IR Heater Accessories Stainless Steel Clips Infrared Heat Lamp Clip

This product is used to install single tube IR heating lamp, especially for short wave IR heating lamp with SK end ceramic caps. Usually we provide you 2 clips each lamp free of charge.

Reflector 1. which can help to reflect the light radiated from the lamps to focus on the object, saving energy & inproving working efficiency 2. besides, you can adjust the reflector's grdient by the ajustable device at two sides to realze the best drying position 3. the longest reflector can be 3000mm, available for single tube and twin tube

Quartz glass infrared heater lamps is playing the significant part of plastic components welding. Energy from the IR heater lamps is absorbed by the material and transformed into heat, the heat is transferred without contact, and the heat input is fast, specific and energy-efficient.

Because of their long life, medium wave quartz infrared heaters perform extremely well in continuous processes. Also it is slower in response to changes in process requirement as compared to the short-wavelength lamps and are slower to heat up and cool down.

Short wave quartz infrared heaters are comprise finely coiled tungsten filament surrounded by a quartz glass and kinds of halogen gas. Twin tube IR emitter is made up of 8-shape high-purity clear quartz twin tube.Power Density up to 150KW/m2 is achieved. Heating up and cooling down time is approximately one second.

Each infrared lamp bead can be controlled by the single-chip microcomputer to control its power output, so that the temperature of each area is close to same, and the temperature error can be ±1 °C, which greatly improves the quality of the product.

Carbon infrared heaters have heating elements made from woven carbon fibers which are housed in quartz. They operate at around 1,200C and emit medium wave length radiation,it dries water-based coatings more efficiently than short-wave infrared radiators.

Short-Wave Infrared emitters produce infrared waves of around 0.75 – 1.4 microns in wavelength and operate at high temperatures above 1,300 – 2,6000C. Since these wavelengths have higher frequencies, they tend to be more transmissive and reflective.The high efficiency of this technique, however, not only follows from the absorption properties of the materials to be heated, but also in conjunction with the atmosphere.